HP ThinPro 5.0 - Administrator Guide

Table E-11 root > ConnectionType > xen (continued)
Registry key Description
root/ConnectionType/xen/general/TWIModeResizeType The default is 1.
root/ConnectionType/xen/general/allowReadOn{AthruZ} Set to 1 to allow the user to read the mapped drive from the
remote host. If this is set to 0, no files will show up in the
mapped drive on the remote host.
root/ConnectionType/xen/general/allowWriteOn{AthruZ} Set to 1 to allow the user to write to the mapped drive from
the remote host. If this is set to 0, the user will be able to
read and copy files off of the drive, but will not be able to
make any changes or add new files to the drive.
root/ConnectionType/xen/general/async Directly maps to the Citrix INI file setting
CommPollSize=boolean, which enables asynchronous
polling. The default is 0 for 'Off'.
root/ConnectionType/xen/general/autoReconnect Directly maps to the Citrix INI file setting
TransportReconnectEnabled=boolean, which enables
automatic session reconnect. The default is 0.
NOTE: This is not the same as the connection-specific
‘autoReconnect’. This reconnect occurs internally within the
Citrix client without restarting the connection.
root/ConnectionType/xen/general/bitmapCacheSize Directly maps to the Citrix INI file setting
PersistentCacheMinBitmap=integer, which is the
minimum size of bitmap for caching. The default is 8192. On
all clients, this is set to a default of 2048.
root/ConnectionType/xen/general/colorDepth Forces ICA to use a specific color depth for all connections.
This is usually done in either specialized environments
where the automatic depth selection fails or in very slow
networks to reduce congestion.
root/ConnectionType/xen/general/colorMapping Set to Shared - Approximate Colors to enable and Private -
Exact Colors to disable. Enabled by default. Maps to the
Citrix INI file setting ApproximateColors=boolean, which
uses approximate colors from the default colormap rather
than a private colormap and precise colors. Used only when
the DesiredColor value is 2 (256 colors). The default is
False.
root/ConnectionType/xen/general/defaultBrowserProtocol Set to TCP/IP HTTP Browser by default. Can be set to SSL/
TLS HTTPS Browser or TCP/IP Browser. Maps to the Citrix
INI file setting BrowserProtocol=[UDP|HTTPonTCP],
which controls the protocol used to locate the ICA host for
the connection. If not specified, the default value from the
[WFClient] section of wfclient.ini is used.
root/ConnectionType/xen/general/
drivePathMappedOn{AthruZ}
The local filesystem directory to map to the remote host.
Typically, this is set to /media to allow all connected USB
drives to be mapped to the remote host through a single
drive letter.
root/ConnectionType/xen/general/enableAlertSound Set to the defa
ult 1 to enable Windows alert sounds. Set to 0
to disable. Indirectly maps to the Citrix INI file setting
DisableSound=boolean, which disables Windows alert
sounds. The default is False.
root/ConnectionType/xen/general/enableAudioInput Set to the default 1 to enable audio input. This will set both
the ‘AllowAudioInput’ and ‘EnableAudioInput’ settings to 1 in
the wfclient.ini and appsrv.ini.
root > ConnectionType 117