HP ThinPro 5.0 - Administrator Guide

Table E-9 root > ConnectionType > view (continued)
Registry key Description
improve performance on low-bandwith connections.
Generally, this affects only RemoteFX.
root/ConnectionType/view/connections/{UUID}/
xfreerdpOptions/perfFlagFontSmoothing
If set to 1, allows font smoothing when supported by the
server and enabled. Turning it off can improve performance
on low-bandwith connections.
root/ConnectionType/view/connections/{UUID}/
xfreerdpOptions/perfFlagNoCursorSettings
If set to 1, disables cursor blinking, which can improve
performance on low-bandwidth RDP connections.
root/ConnectionType/view/connections/{UUID}/
xfreerdpOptions/perfFlagNoCursorShadow
If set to 1, turns off mouse cursor shadows, which can
improve performance on low-bandwidth RDP connections.
root/ConnectionType/view/connections/{UUID}/
xfreerdpOptions/perfFlagNoMenuAnimations
If set to 1, turns off menu animations, which can improve
performance on low-bandwidth RDP connections.
root/ConnectionType/view/connections/{UUID}/
xfreerdpOptions/perfFlagNoTheming
If set to 1, turns off user interface themes, which can improve
performance on low-bandwidth RDP connections.
root/ConnectionType/view/connections/{UUID}/
xfreerdpOptions/perfFlagNoWallpaper
If set to 1, turns off the desktop wallpaper, which can
improve performance on low-bandwidth RDP connections.
root/ConnectionType/view/connections/{UUID}/
xfreerdpOptions/perfFlagNoWindowDrag
If set to 1, turns off full-content window drag, which can
improve performance on low-bandwidth RDP connections.
The window outline will be used instead.
root/ConnectionType/view/connections/{UUID}/
xfreerdpOptions/portMapping
If set to 1, the following local serial and parallel ports will be
redirected to the remote host: ttyS0, ttyS1, ttyS2, ttyS3,
ttyUSB0, lp0.
root/ConnectionType/view/connections/{UUID}/
xfreerdpOptions/printerMapping
If set to 1, the CUPS printer redirection plugin will be
activated, causing all printers defined locally through CUPS
to be redirected to the remote host.
root/ConnectionType/view/connections/{UUID}/
xfreerdpOptions/rdpEncryption
If set to 1, standard RDP encryption will be used to encrypt
all data between the client and server.
root/ConnectionType/view/connections/{UUID}/
xfreerdpOptions/remoteFx
Use RemoteFX, if available.
root/ConnectionType/view/connections/{UUID}/
xfreerdpOptions/sendHostname
The supplied text will be sent to the remote host as the client
hostname. If left blank, the system hostname will be sent to
the hostname.
NOTE: The general settings key 'root/ConnectionType/
freerdp/coreSettings/sendHostname' must be set to
'hostname' for this key to be used.
root/ConnectionType/view/connections/{UUID}/
xfreerdpOptions/sound
When set to the default Bring to this computer, sound will be
redirected from the remote host to the client using a standard
virtual channel. When set to Leave at remote computer,
sound will be left at the remote host. This might be useful
when using a USB-redirected audio device. If set to any
other value, audio will be disabled.
HP recommends that sound be set to Bring to this computer
because this will improve audio quality and ensure that any
client audio redirected through other virtual channels such as
MMR matches local audio settings.
root/ConnectionType/view/connections/{UUID}/
xfreerdpOptions/timeoutError
The number of milliseconds to wait after losing connection
with the server before presenting an error dialog box and
closing the connection. Disabled if 0.
root > ConnectionType 107