HP ThinPro 5.0 - Administrator Guide

Table E-9 root > ConnectionType > view (continued)
Registry key Description
connect. If set to Allow all connections, the server certificate
will not be verified and connections to any server will be
allowed.
root/ConnectionType/view/connections/{UUID}/
waitForNetwork
If set to 1, the connection will not be launched until
networking is available. This makes sure that, on a slow
network, the connection does not launch before networking
is available, causing a failure.
root/ConnectionType/view/connections/{UUID}/
xfreerdpOptions/attachToConsole
root/ConnectionType/view/connections/{UUID}/
xfreerdpOptions/audioLatency
The average milliseconds of offset between the audio stream
and the display of corresponding video frames after
decoding.
root/ConnectionType/view/connections/{UUID}/
xfreerdpOptions/colorDepth
This setting is deprecated. It is used to reduce the color
depth of the connection below that of the native desktop
resolution. This is frequently used to reduce network
bandwidth.
NOTE: Reducing color depth to a level not supported by
the video driver may cause screen corruption or launch
failures.
root/ConnectionType/view/connections/{UUID}/
xfreerdpOptions/compression
If set to 1, compression of RDP data between client and
server will be enabled. Setting to '0' will disable compression.
Compression is enabled by default.
root/ConnectionType/view/connections/{UUID}/
xfreerdpOptions/disableMMRwithRFX
If not 0, disables multimedia redirection if a valid remoteFX
session is established.
root/ConnectionType/view/connections/{UUID}/
xfreerdpOptions/frameAcknowledgeCount
This is the number of video frames the server can push
without waiting for acknowledgement from the client. Lower
numbers result in a more responsive desktop but lower
frame rate. If set to 0, frame acknowledge will not be used in
the client-server interactions.
root/ConnectionType/view/connections/{UUID}/
xfreerdpOptions/general/enableMMR
If set to 1, enables the multimedia redirection plugin, causing
supported codecs played through Windows Media Player to
be redirected to the client. This improves full-screen and high
definition video playback for codecs such as WMV9, VC1,
and MPEG4.
root/ConnectionType/view/connections/{UUID}/
xfreerdpOptions/general/sendHostname
If set to the default of hostname, sends the system hostname
to the remote host. This is typically used by an administrator
to identify the client machine associated with a particular
RDP session. The hostname sent can be overriden by
setting the key ‘sendHostname’ in the connection specific
settings. If set to mac, sends the MAC address of the first
available network adapter instead of the hostname.
root/ConnectionType/view/connections/{UUID}/
xfreerdpOptions/mouseMotionEvents
When set to 0, mouse motion events will not be sent to the
server. This may prevent some user feedback such as
tooltips from functioning properly.
root/ConnectionType/view/connections/{UUID}/
xfreerdpOptions/offScreenBitmaps
When set to 0, off-screen bitmaps will be disabled. This
might slightly increase performance but will cause blocks of
the screen to be updated asynchronously, causing screen
transitions to update non-uniformly.
root/ConnectionType/view/connections/{UUID}/
xfreerdpOptions/perfFlagDesktopComposition
If set to 1, allows desktop composition, such as translucent
borders, if supported by the server. Turning it off may
106 Appendix E Registry keys