HP ThinPro 5.0 - Administrator Guide

Table E-9 root > ConnectionType > view (continued)
Registry key Description
root/ConnectionType/view/connections/{UUID}/
autoReconnect
If 1, the system will attempt to automatically restart the
connection after it has been closed. If required, credentials
should be supplied through the zero-login/
defaultCredentials field. "autostart" is frequently used
in conjunction with this setting.
root/ConnectionType/view/connections/{UUID}/
autoReconnectDelay
Indicates the amount of time in seconds to wait before
restarting the connection. The default of 0 will cause the
connection to restart immediately upon close or disconnect.
This setting takes effect only when 'autoReconnect' is set to
1.
root/ConnectionType/view/connections/{UUID}/
automaticLogin
When enabled, the VMware Horizon View client attempts to
automatically login if all fields are provided. If this is not
enabled, users must click Connect in the VMware Horizon
View client to contact the VMware Horizon View Connection
Server, login, and select a desktop.
root/ConnectionType/view/connections/{UUID}/autostart If greater than 0, the system will attempt to automatically
start the connection when the client is booted. If required,
credentials should be supplied through the zero-login/
defaultCredentials field. "autoReconnect" is frequently
used in conjunction with this setting.
root/ConnectionType/view/connections/{UUID}/
autostartDelay
Indicates the amount of time in seconds to wait before
starting the connection on boot. The default of 0 will cause
the connection to start immediately upon boot. This setting
takes effect only when 'autostart' is set to 1.
root/ConnectionType/view/connections/{UUID}/
beforeStartingCommand
The full path to a script or binary to run before the connection
has started.
root/ConnectionType/view/connections/{UUID}/
closeAfterDisconnect
If set to 1, the connection will be closed after the first desktop
is disconnected. If this is not enabled, the VMware Horizon
View client will return to the desktop selection screen. This is
enabled by default to prevent users from accidently leaving
the connection at the desktop selection screen after logging
off.
root/ConnectionType/view/connections/{UUID}/coord
root/ConnectionType/view/connections/{UUID}/
dependConnectionId
root/ConnectionType/view/connections/{UUID}/desktop If specified, the named desktop will automatically launch
upon login.
NOTE: By default, if there is only one desktop available, it
will automatically launch without needing to be specified.
root/ConnectionType/view/connections/{UUID}/directory
root/ConnectionType/view/connections/{UUID}/domain The domain to provide to the VMware Horizon View server. If
no domain is specified, the default domain will be used.
root/ConnectionType/view/connections/{UUID}/
enableSingleMode
root/ConnectionType/view/connections/{UUID}/
extraEnvValues/{UUID}/key
root/ConnectionType/view/connections/{UUID}/
extraEnvValues/{UUID}/value
104 Appendix E Registry keys