HP Easy Tools Administrator's Guide

HP Easy Tools for Microsoft

Windows

Embedded Standard

2009 (WES 2009) and Windows

Embedded Standard 7 (WES 7)

HP Easy Tools does not open if HP Device Manager (HPDM) or HP System Update services is running.

To prevent HP Easy Tools from autolaunching, select Do not auto-start HP Easy Setup Wizard

when the following screen appears while the application is booting.

NOTE: You must be logged on as administrator to use HP Easy Tools. To access HP Easy Tools:

The HP Easy Tools window has three main parts:

●

Left Pane

All configuration settings categories are listed in the left pane. The HP Easy Tools wizard leads

you through each category, but if you want to jump forward or backward, just click the category

in the left pane. Sections that have been viewed are marked by a gray check mark. Sections that

have been modified are marked by a green check mark.

●

Center Pane

When you advance to or select a category in the left pane, the configuration options appear in

the center pane. Click on one to open the configuration work area.

●

Right Pane

As you select a category and a specific setting, descriptions of the category and the specific

setting appear in the right pane.

Chapter 3 HP Easy Tools for Microsoft

Windows

Embedded Standard 2009 (WES 2009)

and Windows Embedded Standard 7 (WES 7)