HP ThinPro 4.3 Administrator's Guide

3 Connections
HP ThinPro allows you to access and manage remote connections. To access all HP ThinPro
functionality, you must log in as an Administrator. As a User, you can only run connections and have
limited access to HP ThinPro functionality.
The HP ThinPro display, when configured, lists all server and/or application connections assigned to
the user currently logged on to the terminal. For each connection, the display shows the name, type,
and status of the connection.
NOTE: Double-click any displayed connection to activate that connection.
In Administrative Mode, you can configure and assign connections by clicking Connections.
Figure 3-1 HP ThinPro Control Center—Administrative Mode
The Connections window lists all connections that you can assign to users. You can add, edit, and
delete connections from this window.
●
Connection Name: Displays the name of the connection. You cannot change the connection
name from this column.
●
Type: Displays the type of connection. You cannot change the connection type from this column.
●
Status: Displays the status, active or inactive, of the connection.
There are eight buttons across the top of the connection list:
●
Connect on page 5: Click to start a selected connection.
●
Disconnect on page 5: Click to disconnect a selected connection.
●
General settings on page 5: Click to manage connection settings.
4 Chapter 3 Connections