HP ThinPro 4.2 Administrator's Guide

NOTE: This option is not available on all models.
Setting connections and Control Panel user permissions
To set user permissions on the Connections and Control Panel tabs:
1. Double-click HP ThinPro Configuration.
2. Click Connections in the left panel and select authorized connections by selecting or clearing
check boxes.
3. Click Control Panel in the left panel and select authorized applications by selecting or clearing
check boxes.
4. Click Apply, then click OK to close the dialog box.
Setting user desktop and system options
To configure the Desktop and System tabs:
1. Double-click HP ThinPro Configuration.
2. Click Desktop in the left panel and select desktop options by selecting or clearing check boxes.
3. Click System in the left panel and set asset information and enable or disable the WakeOnLAN
mode by selecting or clearing check boxes.
NOTE: This option is not available on all models.
4. Click Apply, then click OK to close the dialog box.
Management
These utilities are management tools that can help you manage a thin client network. The following
utilities are available on the Management tab:
●
AD/DDNS Manager on page 36
●
Easy Deploy on page 36
●
Easy Config on page 36
●
Easy Update on page 36
●
Factory reset on page 36
●
HP Automatic Update on page 37
●
HPDM Agent on page 37
●
SSHD Manager on page 37
●
ThinState on page 37
●
VNC Shadow on page 41
Control Panel 35