HP Smart Zero Core 4.3 Administrator's Guide

Table C-4 root > ConnectionType > view (continued)
Registry key Description
root/ConnectionType/view/connections/{UUID}/
afterStoppedCommand
The full path to a script or binary to run after the connection
has finished.
root/ConnectionType/view/connections/{UUID}/appInMenu
root/ConnectionType/view/connections/{UUID}/
appOnDesktop
root/ConnectionType/view/connections/{UUID}/
attachToConsole
root/ConnectionType/view/connections/{UUID}/
authorizations/user/edit
Indicates whether the user has permission to modify the
connection settings for this connection. Set to '1' to allow
access, 0 to deny access.
NOTE: The connection can be edited in Administrator
Mode even when this key is set to '0'.
root/ConnectionType/view/connections/{UUID}/
authorizations/user/execution
Indicates whether the user has permission to execute the
connection. Set to 1 to allow access, 0 to deny access.
NOTE: The connection can be edited in Administrator
Mode even when this key is set to 0.
root/ConnectionType/view/connections/{UUID}/
automaticLogin
When enabled, the VMware Horizon View client will attempt
to automatically login if all fields are provided. If this is not
enabled, users will have to manually click Connect in the
VMware Horizon View client to contact the VMware Horizon
View server, log in, and select a desktop.
root/ConnectionType/view/connections/{UUID}/
autoReconnect
If 1, the system will attempt to automatically restart the
connection after it has been closed. If required, credentials
should be supplied through the zero-login/
defaultCredentials field. "autostart" is frequently used
in conjunction with this setting.
root/ConnectionType/view/connections/{UUID}/
autoReconnectDelay
Indicates the amount of time in seconds to wait before
restarting the connection. The default of 0 will cause the
connection to restart immediately upon close or disconnect.
This setting takes effect only when 'autoReconnect' is set to
1.
root/ConnectionType/view/connections/{UUID}/autostart If greater than 0, the system will attempt to automatically
start the connection when the client is booted. If required,
credentials should be supplied through the zero-login/
defaultCredentials field. "autoReconnect" is frequently
used in conjunction with this setting.
root/ConnectionType/view/connections/{UUID}/
autostartDelay
Indicates the amount of time in seconds to wait before
starting the connection on boot. The default of 0 will cause
the connection to start immediately upon boot. This setting
takes effect only when 'autostart' is set to 1.
root/ConnectionType/view/connections/{UUID}/
beforeStartingCommand
The full path to a script or binary to run before the connection
has started.
root/ConnectionType/view/connections/{UUID}/
closeAfterDisconnect
If set to 1, the connection will be closed after the first desktop
is disconnected. If this is not enabled, the VMware Horizon
View client will return to the desktop selection screen. This is
enabled by default to prevent users from accidently leaving
the connection at the desktop selection screen after logging
off.
root/ConnectionType/view/connections/{UUID}/colorDepth
root > ConnectionType 65