HP ThinPro 5.0 - Administrator Guide

Table E-11 root > ConnectionType > xen (continued)
Registry key Description
root/ConnectionType/xen/general/encryptionLevel Directly maps to the Citrix INI file setting
EncryptionLevelSession=[None | Basic | RC5
(128 bit - Login Only) | RC5 (40 bit) | RC5
(56 bit) | RC5 (128 bit)], which specifies the level
of encryption on a per-connection basis. Encryption protocols
for all levels are defined in the [EncryptionLevelSession]
section of module.ini.
root/ConnectionType/xen/general/fontSmoothingType Specifies font smoothing type for the session.
root/ConnectionType/xen/general/hotKey{1 thru 15}Char The hotkey character to forward to the remote session. For
example, F1 for hotKey1Char.
root/ConnectionType/xen/general/hotKey{1 thru 15}Shift The key shift state combination used to activate the chosen
hotkey character. Defaults to Ctrl+Shift. Can be set to Shift,
Ctrl, Alt, Alt+Shift, Alt+Ctrl, or Ctrl+Shift.
root/ConnectionType/xen/general/httpAddresses/{UUID}/
address
root/ConnectionType/xen/general/
keyPassthroughEscapeChar
Directly maps to the Citrix INI file setting
KeyPassthroughEscapeChar=string, which is the key
for the keyboard command to disable the transparent
keyboard mode. The default is F2. All clients are set to F1 by
default.
root/ConnectionType/xen/general/
keyPassthroughEscapeShift
Directly maps to the Citrix INI file setting
KeyPassthroughEscapeShift=string, which is the key
for the keyboard command to disable the transparent
keyboard mode. The default is Ctrl. All clients are set to Alt
by default.
root/ConnectionType/xen/general/lastComPortNum The number of mapped serial ports. Set to 0 to disable serial
ports mapping.
root/ConnectionType/xen/general/localTextEcho Can be set to On, Off, or the default Auto. Indirectly maps to
the Citrix INI file setting ZLKeyboardMode=[0|1|2], which
controls keyboard latency reduction.
0=off
1=always on
2=dynamic selection based on actual latency
root/ConnectionType/xen/general/monitorNetwork Monitor network connectivity. Set to Off to monitor nothing.
Set to Local network link status only to only monitor the
status of the local network link. Set to Server online status to
monitor both the status of the local network link and the
server’s connectivity. If it is broken, exit to log in to the GUI
for the client or disconnect the connection for HP ThinPro.
root/ConnectionType/xen/general/mouseClickFeedback Can be set to
On, Off, or the default Auto. Indirectly maps to
the Citrix INI file setting ZLKeyboardMode=[0|1|2], which
controls keyboard latency reduction.
0=off
1=always on
2=dynamic selection based on actual latency
root/ConnectionType/xen/general/mouseMiddleButtonPaste Directly maps to the Citrix INI file setting
MouseSendsControlV=boolean, which enables a middle-
root > ConnectionType 119