HP ThinPro 4.2 Administrator's Guide

NOTE: The language can also be set by configuring Dynamic Host Configuration Protocol (DHCP)
tag 192 as a string whose value is English, German, Spanish, French, Japanese, or Simplified
Chinese.
Network
To configure network settings:
1. In the HP ThinPro Control Panel, double-click Network.
2. Configure the Wired tab:
a. Enable IPv6—Check to use IPv6 connection. Default is IPv4.
b. Ethernet Speed—List of Link speed/Duplex mode pairings available.
c. Connection Method—Option to use Auto or Static connection
d. Static Address Configuration—Enable IPv6 NOT enabled
●
IP Address
●
Subnet Mask
● Default Gateway
e. Static Address Configuration—Enable IPv6 enabled
●
IPv6 Address—Example: 2001:0db8:85a3:0000:0000:8a2e:0370:7334
●
Subnet Previx Length—Example 64
●
Default Gateway—Example: fe80::20a:42ff:feb0:5400%4
f. Security Settings
Authentication
●
TTLS
◦
Inner Authentication—Further Authentication layer
◦
CA Certificate—Location of security certificate
◦
Anonymous Identity—(Optional) Any temporary name
◦
Username—User's username
◦
Password—User's password
●
PEAP
◦
Inner Authentication—Further Authentication layer
◦
PEAP Version—Version of PEAP to be used
◦
CA Certificate—Location of security certificate
◦
Anonymous Identity—(Optional) Any temporary name
32 Chapter 3 Reference