HP ThinPro 4.2 Administrator's Guide

●
Web browser on page 15
●
RGS on page 16
●
VMware View on page 16
●
XDMCP on page 18
●
SSH on page 19
●
Telnet on page 20
●
Custom on page 20
Citrix ICA
1. To add a Citrix ICA connection, click Connections > Add > Citrix.
2. Set the Citrix ICA configuration options:
Table 3-11 Citrix ICA connection network settings
Option Description
Name The connection name.
Server URL The URL of the server.
Username The username to use for the connection.
Password The password to use for the connection.
Domain The domain to use for the connection.
Click Next to continue.
3. Set the Citrix ICA advanced configuration options:
Table 3-12 Citrix ICA connection advanced configuration options
Option Description
Fallback connection
Select a fallback connection. ThinPro attempts to start a fallback connection
when the original connection does not start.
Auto start priority
The autostart priority determines the connection startup order. 0 means the
connection is disabled. The other values determine the startup order. Valid
options are: 0, 1, 2, 3, 4, and 5.
Auto reconnect
When enabled, HP ThinPro will attempt to reconnect if the original connection
is dropped.
Wait for Network before
connecting
Disable this option if your connection does not need the network to start or if
you do not want to wait for the network to start the connection.
Show icon on desktop Creates a desktop icon for this connection.
4. Click Finish to save your settings and close the wizard.
NOTE: To enable Citrix ICA USB Redirection, use the USB Manager utility. See USB Manager
on page 29 for instructions.
10 Chapter 3 Reference