HP Imaging Plugin 1.0 User Manual

Installation
HP Imaging Plug-in Server
To install HP Imaging Plug-in Server, execute HP_Imaging_Plugin_Server.exe on the server running
Configuration Manager 2007 and Device Manager 2011. Restart Configuration Manager 2007 Console
after you install HP Imaging Plug-in Server.
HP Imaging Plug-in Client
To install HP Imaging Plug-in Client, execute HP_Imaging_Plugin_Client.exe on the HP Thin Clients. There is
no special configuration to be set in installation. For deployed Thin Clients, we recommend using
Configuration Manager 2007/Device Manager 2011 to remotely install HP Imaging Plug-in Clients. Please
refer to Distribute HP Imaging Plug-in Client via Device Manager 2011 for details.
Silent Installation
Both HP_Imaging_Plugin_Server.exe and HP_Imaging_Plugin_Client.exe are created by Install Shield -
Install Script MSI project. To install them silently, run them with parameter „-r‟ to record silent response files.
The /f1filename switch allows you to specify a fully-qualified alternate name for the silent response file.
After recording response files, please run the setup applications with “-s /f1filename” to install them silently.
Below are the samples:
1) Record silent response files:
a. HP_Imaging_Plugin_Client.exe –r /f1.\InstallClient.iss
b. HP_Imaging_Plugin_Server.exe –r /f1.\InstallServer.iss
2) Silent installation
a. HP_Imaging_Plugin_Client.exe –s /f1.\InstallClient.iss
b. HP_Imaging_Plugin_Server.exe –s /f1.\InstallServer.iss
Note: There should be no space between the /f1 switch and the file name.
You also can record response files for upgrading or un-installation.
For more details, see
http://kb.flexerasoftware.com/doc/Helpnet/installshield12helplib/InstallShieldSilent.htm.