HP Easy Tools Administrator's Guide

HP Easy Tools for WES has four sections:
●
Easy Update on page 26—This section enables you to install and maintain official HP images
and softpaqs.
●
Easy Config on page 31—Configure thin clients and software in this section.
●
Easy Deploy on page 39—Use this section to capture and deploy images, settings, and
configurations and set administrative passwords.
●
Thank You on page 45
NOTE: If a Write Filter is enabled on the thin client, you will not be able to apply a new
configuration until you disable the Write Filter.
1. Log on as administrator.
To access the Administrator logon:
a. While holding down the Shift key, click Start > Shut Down.
b. Still holding down the Shift key, select Log Off, and then click OK in the Shut Down
dialog box.
NOTE: The default Administrator user name and password is Administrator.
25