Hardware Reference Guide
Table Of Contents
- Product Features
- Hardware Changes
- Specifications
- Security Provisions
- Mounting the Thin Client
- Thin Client Operation
- Electrostatic Discharge
- Shipping Information
- Index
Removing the Stand
To remove the stand:
1. Turn unit upside down.
2. Press down on the tab (1), and then slide the stand toward the rear of the unit and pull it up to
remove it from the unit (2).
Figure 1-8 Removing the stand
Using the Power Cord Retention Slot
To prevent accidental disconnection, press a loop of the power cord into the power cord retention slot.
Figure 1-9 Power cord retention slot
6 Chapter 1 Product Features