HP Smart Client Administrator's Guide

Status tab
If the network is connected to a valid network, the status tab shows the network settings: IP Address,
Gateway, and MAC Address. This Network field displays an X and a message of No network
available if no valid network is available. (To set up the network, select Control Panel tool bar/
Additional Configuration/Network Settings.)
The Smart Client Service field displays the name of the server, if this option is set up for Smart Client
Service to a valid, configured Smart Client Service server. If Smart Client Service is not set up or if it is
pointed to an invalid Smart Client Service server, an X is displayed next to the Smart Client Service
field. A message stating that an error has occurred while attempting to retrieve client settings from the
Smart Client Service server is also displayed. (To set up Smart Client Service, select Control
Panel tool bar/Additional Configuration/Smart Client Service.)
The Configuration field
The Connection field displays an X next to it if you have not made any server type connection. If you
have made a server type connection, the connection field displays a check next to it and states that a
default connection is configured.
Four GUI buttons
51