HP Smart Client Administrator's Guide

7. To make the printer active, select the Active check box.
8. Click the Create button, now visible within the Window.
The default baud rate for the serial printer may not be appropriate for it to work. If it does not print
properly or at all, then try these steps to get it to work:
1. To obtain your serial printer’s baud rate, press and hold the FEED button prior to turning the
printer on, then turn the printer on and release the FEED button.
2. Using Profile Editor or Registry Editor, go to root/printer-mapping-mgr/{UUID}/
BaudRate and type in the baud rate for your printer.
NOTE: The UUID will match the UUID of the printer in root/printers. Look there and match the
printer with the UUID in root/printer-mapping-mgr.
3. Click Save, right-click the UUID (which is a long string of letters and numbers), and then click
Apply Changes.
System information
The system information button is the i button. When you click the i button, the About This Thin Client
page appears. Five tabs are available on this page:
●
Status tab on page 51
●
Network tab on page 52
●
Net Tools tab on page 53
●
System Information tab on page 54
●
System Logs tab on page 54
50 Chapter 3 Client Usage