HP Smart Client Administrator's Guide

Manual update
The final method, Manual update, can be used to have a thin client connect to a specific server for
updates. This can be useful if you want to test an update on a single thin client before pushing the
update to many thin clients or if you have specific updates to be installed on only one or two thin
clients.
Manual update is a nice substitute for DHCP Tagging, if you only have a couple of thin clients requiring
a specific update. However, if multiple units require specific updates, DHCP Tagging is the better
option. If no update segregation is required, Broadcast update is the recommended method.
1.
Click the wrench icon
, and then select Additional Configuration > Automatic Update.
2. In the dialog box that opens, select Enable manual configuration, and then select http from
the Protocol menu.
Automatic intelligence
39