Hardware Reference Guide HP t505 Flexible Thin Client

Rear Panel Components

For more information, go to http://www.hp.com and search for your specific thin client model to find

the model-specific QuickSpecs.

Figure 1-2 Rear panel components

(1) Ethernet RJ-45 connector (5) Cable lock slot

(2) Serial connectors (4) (6) Power connector

(3) Parallel connector (7) VGA connector

(4) PS/2 connectors (2) (8) Universal serial bus (USB) connectors (2)

Installing the Rubber Feet

You may want to use your thin client in a horizontal orientation. You can install rubber feet on the left

side of the unit to help keep the unit safely in place.

To install the rubber feet:

1. Locate the VESA (Video Electronics Standards Association) holes in the left side of the thin client.

CAUTION: If you use the thin client in a horizontal orientation without the rubber feet, it may

slide and result in equipment damage.

2. Remove the feet from their backing.

Rear Panel Components