HP Smart Zero Core 4.3 Administrator's Guide

Table C-11 root > mouse (continued)
Registry key Description
root/mouse/MouseSpeed The acceleration of the mouse pointer. Typically a number
from 0–25 is in the usable range. 0 will completely disable
acceleration, causing the pointer to move at a constant slow,
but measurable pace.
root/mouse/MouseThreshold The number of pixels before acceleration will be enabled. 0
will set the acceleration to a natural curve that gradually
scales acceleration, allowing for both precise and quick
movements.
root > printer-mapping-mgr
This section describes the registry keys, functions, options, and description in the root > printer-
mapping-mgr folder.
Table C-12 root > printer-mapping-mgr
Registry key Description
root/printer-mapping-mgr/{UUID}/BaudRate For serial printers, this defines the baud rate of the printer.
By default, this will be set to 9600.
root/printer-mapping-mgr/{UUID}/Port An internal key used to identify the port, usually set to the
same as root/printers/{UUID}/Port.
root > printers
This section describes the registry keys, functions, options, and descriptions in the root > printers
folder.
Table C-13 root > printers
Registry key Description
root/printers/{UUID}/Active If set to 1, the printer will be marked active and can be
redirected to remote sessions.
root/printers/{UUID}/Port The port for the printer. For a local printer, this will frequently
be /dev/ttyS0, /dev/lp0, or /dev/ttyUSB0. If a network printer
is defined, this will be set to Network, and a 'ServerIP' key
will be defined with the IP address of the printer.
root/printers/{UUID}/PrinterMDL Set to the printer model. This is a text field used to identify
the printer in local and remote sessions.
root/printers/{UUID}/WindowsDriver Set to the exact Windows Driver model. This is used by RDP
and Citrix printer mapping to identify which printer driver to
install on the remote host.
root > screensaver
This section describes the registry keys, functions, options, and descriptions in the root > screensaver
folder.
84 Appendix C HP Smart Zero Core registry settings