HP Smart Zero Core 4.3 Administrator's Guide

Table C-3 root > ConnectionType > freerdp (continued)
Registry key Description
improve performance on low-bandwith connections.
Generally, this affects only RemoteFX.
root/ConnectionType/freerdp/connections/{UUID}/
perfFlagFontSmoothing
If set to 1, allows font smoothing when supported by the
server and enabled. Turning it off can improve performance
on low-bandwith connections.
root/ConnectionType/freerdp/connections/{UUID}/
perfFlagNoCursorSettings
If set to 1, disables cursor blinking, which can improve
performance on low-bandwidth RDP connections.
root/ConnectionType/freerdp/connections/{UUID}/
perfFlagNoCursorShadow
If set to 1, turns off mouse cursor shadows, which can
improve performance on low-bandwidth RDP connections.
root/ConnectionType/freerdp/connections/{UUID}/
perfFlagNoMenuAnimations
If set to 1, turns off menu animations, which can improve
performance on low-bandwidth RDP connections.
root/ConnectionType/freerdp/connections/{UUID}/
perfFlagNoTheming
If set to 1, turns off user interface themes, which can improve
performance on low-bandwidth RDP connections.
root/ConnectionType/freerdp/connections/{UUID}/
perfFlagNoWallpaper
If set to 1, turns off the desktop wallpaper, which can
improve performance on low-bandwidth RDP connections.
root/ConnectionType/freerdp/connections/{UUID}/
perfFlagNoWindowDrag
If set to 1, turns off full-content window drag, which can
improve performance on low-bandwidth RDP connections.
The window outline will be used instead.
root/ConnectionType/freerdp/connections/{UUID}/port The port number to use when contacting the RDP server. By
default, this is set to 3389 and will rarely need to be
changed.
root/ConnectionType/freerdp/connections/{UUID}/
portMapping
If set to 1, the following local serial and parallel ports will be
redirected to the remote host: ttyS0, ttyS1, ttyS2, ttyS3,
ttyUSB0, lp0.
root/ConnectionType/freerdp/connections/{UUID}/
printerMapping
If set to 1, the CUPS printer redirection plugin will be
activated, causing all printers defined locally through CUPS
to be redirected to the remote host.
root/ConnectionType/freerdp/connections/{UUID}/
rdpEncryption
If set to 1, standard RDP encryption will be used to encrypt
all data between the client and server.
root/ConnectionType/freerdp/connections/{UUID}/remoteFx Use RemoteFX, if available.
root/ConnectionType/freerdp/connections/{UUID}/
seamlessWindow
If set to 1, window decorations will be disabled. This might be
desirable in a multi-monitor configuration to allow the
connection to be set to the size of the primary monitor.
root/ConnectionType/freerdp/connections/{UUID}/
sendHostname
The supplied text will be sent to the remote host as the client
hostname. If left blank, the system hostname will be sent to
the hostname.
NOTE: The general settings key 'root/ConnectionType/
freerdp/coreSettings/sendHostname' must be set to
'hostname' for this key to be used.
root/ConnectionType/freerdp/connections/{UUID}/smartcard If set to 1, local smart card authentication will be allowed on
the remote host. This will disable the Network Level
Authentication (NLA).
root/ConnectionType/freerdp/connections/{UUID}/sound When set to
the default Bring to this computer, sound will be
redirected from the remote host to the client using a standard
virtual channel. When set to Leave at remote computer,
sound will be left at the remote host. This might be useful
62 Appendix C HP Smart Zero Core registry settings