HP Systems Insight Manager 7.2 Technical Reference Guide

5. Go to the <HPSIM Install folder>\Systems Insight Manager\config\certstor
directory.
6. Replace the hp.keystore and keyfile.3 files with the files copied in step 3.
7. On the target CMS system, select Start→Settings→Control Panel→Administrative
Tools→Services.
8. Restart the HP SIM service.
NOTE: You might see a browser warning indicating that the name in the certificate does
not match the name of the site. This result is expected because you are temporarily using the
certificate from the source CMS, but you can view the certificate displayed by the browser to
ensure its authenticity before signing in.
9. Sign in with administrative rights to HP SIM on the target CMS. Select Options→Security→HP
Systems Insight Manager Server Certificate.
10. To create a new server certificate, click New.
11. On the target CMS system, select Start→Settings→Control Panel→Administrative
Tools→Services.
12. Restart the HP SIM service.
13. Install the new server certificate on the required managed systems using the Replicate Agent
Settings feature. For more information, see “Using the Replicate Agent Settings feature” (page
60).
Procedure 28 Migrating certificates when the source CMS has a lower number of trusted certificates
1. Log in to the source CMS system with administrative privileges.
2. Select Options→Security→Credentials→Trusted Systems.
3. Select a certificate, and then click Export.
4. Save the certificate locally.
5. Repeat steps 2 and 3 for all certificates listed on the Trusted System Certificates page.
6. Copy all exported certificates to the target CMS system.
7. Sign in with administrative rights to HP SIM on the target CMS.
8. Select Options→Security→Credentials→Trusted Systems
9. Click Import.
10. Click Browse, and then select a certificate.
11. Click OK.
12. Repeat steps 9 through 11 for all certificates.
Using the Replicate Agent Settings feature
NOTE: This section assumes agents are already configured to trust the source CMS.
NOTE: This process configures the agents to trust only the new target CMS. If trust for the original
source CMS is still necessary, perform steps 5, 6, and 13 (or 16) using the source CMS.
Procedure 29 Configuring agents to trust only the new target CMS
1. Log in to the HP SMH on the target CMS.
2. Select Settings→Security→Trust Mode.
3. Select Trust by Certificate, and then click Save Configuration.
4. Select Settings→Security→Trusted Management Servers.
5. Enter the IP address of the target CMS in the field adjacent to Add Certificate From Server.
6. Click Add Certificate From Server.
7. Sign in with administrative rights to HP SIM on the source CMS.
8. Select Configure→Replicate Agent Settings.
60 Initial setup