HP Systems Insight Manager 7.2 Technical Reference Guide

Creating new users on management processors
Procedure 256 Creating an HP Integrity and HP 9000 management processor new user
1. Under Enter properties for a new user account, enter:
• Login Id
(Mandatory) This is the name that must be used when logging into a management
processor. The maximum length for a Login Id is 25 characters.
• Password
(Mandatory) This is the password used when logging into a management processor. The
password must be a minimum of 6 to 24 characters.
• Password (Verify)
(Mandatory) The password must be provided a second time for verification.
• User name
(Mandatory) This name appears in the management processor user list. It is not necessarily
the same as the login name. The maximum length is 25 characters.
2. Under Access Rights, select the access rights for the user. Usually, a user is granted the Console
Access right.
• Console access
• Power access
• Management processor configuration
• User administration
3. Click Run Now to run the task immediately. Click Previous to return to the previous New User
page.
Editing management processor users
Procedure 257 HP Integrity and HP 9000 management processor edit user
1. Select Configure→Management Processor→HP Integrity and HP 9000 iLO→Modify User. The
Modify User page appears.
2. Select the target management processors,, and then click Next. The Step 2: Enter properties
to modify an existing user account page appears.
3. Under Enter the login name of the user account you wish to modify, enter the Login Id to be
modified.
4. Under Select the properties you wish to modify for this user account, select from the following
to modify and enter the appropriate information:
• Password
If you select to change the password, verify the password in the Password (Verify) field.
• User name
Select this field to modify the user name. This is not necessarily the same as the login
name. The maximum allowed length is 25 characters.
• Access rights
If you select to modify the access rights, select from Console access, Power access,
Management processor configuration, and User administration. To remove all access
rights for an account, select the Access rights checkbox and leave the Console access,
Power access, Management processor configuration, and User administration checkboxes
unselected.
390 Operations