HP Systems Insight Manager 7.2 Technical Reference Guide
• Set administrator password for Insight Management Agents 7.1 or earlier
Select this option to repair the administrator password on all Insight Management Agents
installed on the target systems as applicable for Windows and Linux systems.
NOTE: Do not set this option if you have Insight Management Agents 7.2 or later
installed.
NOTE: If the remote system is running HP-UX, this option is not executed on the remote
system because it is not applicable on HP-UX systems. If you are configuring only HP-UX
target systems, you do not need to set this option.
If you select this option, you must complete the following steps:
a. In the Password field, enter the new administrator password.
b. In the Password (verify) field, re-enter the new administrator password.
• Select Configure Embedded Remote Support Settings for iLO Management Engine to
configure ERS settings. Select one of the following options:
1. Select Connect this server to an Insight Remote Suppprt hosting server and enter the
Remote Support URL and port.
2. Select Disable the Embedded Remote Support connection.
2. Click Next. The Step 4: Enter credentials page appears.
Configuring credentials
The credentials specified on this page are for a privileged account on the target system.
1. Enter the following credentials.
The credentials used in this step must work for all selected target systems. HP recommends
using domain administrator credentials. Credentials entered here are not saved by HP SIM
except to run a scheduled task later.
If you select Configure secure shell (SSH) access for a Windows target system, the account you
specify must be a member of the local Administrators group. For Windows targets using a
domain account, the account is automatically added to this group.
a. Select one of the following options:
• Use sign-in credentials These credentials must be a privileged account on the managed
system. The sign-in credentials option is available if the following options are selected:
◦ Install WBEM/WMI Provider (HP Insight Management WBEM Provider) for
Windows
◦ Install Simple Network Management Protocol Agent (HP Insight Management
Agents) for Windows
◦ Install Linux PSP or ESX Agents
◦ Install the Version Control Repository Manager for Windows
• Use the following credentials for all systems.
b. In the User name field, enter the system administrator name.
c. In the Password field, enter the system administrator password.
d. In the Password (Verify) field, re-enter the system administrator password.
e. In the Domain (Optional) field, if you are using a domain account, enter the Windows
domain.
Configuring managed systems from a Windows CMS 357