HP Systems Insight Manager 7.2 Technical Reference Guide

a. Enter the port number, user name, and password. Port numbers must be unique.
To add additional port number, user name, and password sets, click Add. To delete
port number, user name, and password sets, click Delete by the set you want to
delete.
b. (Optional) To try additional port number, user name, and password sets, select Try
Others.
4. To save changes and start identification in the background, click OK. To cancel changes, click
Cancel.
Related information
WS-Man credentials
Procedure 89 Configuring WS-MAN credentials
1. Click Show advanced protocol credentials.
2. To set WS-MAN credentials, select WS-MAN.
3. Select from:
• Replace each system's WS-MAN credentials with the following
Use this option to set the user name and password pair for the WS-MAN credentials.
a. Enter the user name and password.
b. To use other credentials if the assigned credentials fail, select If these credentials fail,
try other credentials that may apply. Click the Learn more link for additional
information. By default this box is not selected, unless you have upgraded Systems
Insight Manager.
• Replace WS-MAN credentials individually as follows
Use this option to specify sign-in credentials individually for selected systems.
a. Enter the user name and password for the individual systems.
b. To use other credentials if the assigned credentials fail, check Try others. On new
installations, this is not selected by default. However, for upgrades, the box is selected
for migrated systems. This option appears for each password entered.
4. To save changes and start identification in the background, click OK. To cancel changes, click
Cancel.
Related information
VME credentials
This credential is protocol dependent and is used to manage various VME protocols (vCenter and
SCVMM) present in the virtual management environment. This tab is used to enter credentials that
were configured on the VME server web service page during VME server installation. When you
access the VME System Credentials page, the VME protocols supported by the CMS are listed.
There are several ways of accessing the VME System Credentials page:
• Select Options→Security→Credentials→System Credentials, then click the VME tab.
• Select Options→VME Options→Add or Edit VME Credentials. The Add or Edit VME Credentials
page appears.
• Click the Quick Launch link, and then select Add or Edit VME Credentials. The Add or Edit VME
Credentials page appears.
• From the System Page, click the Tools & Links tab. Then, click the Add or Edit VME Credentials
link under the HP Systems Insight Manager Pages heading.
238 Operations