HP Systems Insight Manager 7.2 Technical Reference Guide

Table 9 Product description section (continued)
DescriptionField
The management protocols that have responded when
attempting to identify the system.
NOTE: If more protocols are expected, verify the
credentials configured on the System Protocol Settings
page.
Management Protocols
The user-specified server role from the ProLiant agents that
can be set from the HP SMH
Server Role
The user-specified comments from the SNMP or other agentsComments
A list of applications running on the systemCurrent Running Applications
This informs you of TPM status and can be set as absent,
disabled, enabled, not present, or present but disabled.
Trusted Platform Module
Displays if embedded remote support is enabled on the
iLO
Embedded Remote Support
HP Insight Control power management
Table 10 HP Insight Control power management section
DescriptionField
Indicates if the system is intended to have redundant power
supplied to it.
System Requires Redundant Power
The height of the system occupied in a rack (in U slots).Height
The possible maximum power consumption of the system
in Watts.
Maximum Power Consumption (Watts)
The minimum power consumption of the system when
powered on in Watts.
Minimum Power (Watts)
The peak observed power consumption of the device
throughout all collected power history.
Peak Observed Power Consumption (Watts)
To configure/edit the System Properties of the system, click Configure.
Contact Information
Table 11 Contact Information section
DescriptionField
A user-specified field from the agents for the physical
location of the system
Location
The user-specified contact of the system from the agentsContact
Many fields in the Contact Information and Product Description sections can be overridden locally
on the CMS through the Edit System Properties pages. For more information, see “Editing system
properties for a single system” (page 301).
120 Screens and product layout