HP Systems Insight Manager 5.3 Technical Reference Guide

DescriptionData TypeColumn Name
The value of CIM_ComputerSystem Name with equal
NodeID
NVCHAR(256)SystemName
Equates to CIM_FanNVCHAR(256)CreationClassName
An address or other identifying information to uniquely
name the LogicalDevice
NVCHAR(256)DeviceID
ActiveCooling is a boolean indicating that the Cooling
Device provides active (as opposed to passive) cooling
BITActiveCooling
An enumeration describing the cooling device type (0 =
Unknown , 1 = Other , 2 = Cabinet Blower , 3 = Compute
Cabinet I/O Fans , 4 = I/O Expansion Cabinet Utility
Chassis Fan , 5 = I/O Expansion Cabinet I/O Fan , 6 =
Processor Fan )
SMALLINTFanType
Physical location of a cooling device.NVCHAR(255)Location
Currently a placeholder. When implemented, this will reflect
the manufacturer of the fan.
NVCHAR(255)Manufacturer
Position is a free-form string indicating the placement of a
PhysicalElement. It can specify slot information on a
HostingBoard, mounting site in a Cabinet, or latitude and
longitude information, for example, from a GPS. It is part
of the key of the Location object.
NVCHAR(255)PhysicalPosition
Partly identifies CIM_FanNVCHAR(255)Tag
Currently a placeholder. When implemented will reflect the
serial number of the fan.
NVCHAR(255)SerialNumber
Currently a placeholder. When implemented will reflect the
version number of the fan.
NVCHAR(255)Version
A label by which the object is knownNVCHAR(255)Name
New column added to hold fan physical positionSmallintR_PhysicalPosition
Redundancy nameNVCHAR(255)RedundancyName
Redundancy statusNVCHAR(255)RedundancyStatus
CIM_HostedStoragePool table
DescriptionData TypeColumn Name
The parent system in the AssociationBIGINTGroupComponent
The StoragePool that is a component of a systemBIGINTPartComponent
CIM_IPProtocolEndpoint table
DescriptionData TypeColumn Name
LUID uniquely defining this table rowBIGINTIPProtocolEndpoint _LUID
Partly identifies CIM_IPProtocolEndpointBIGINTNodeID
Partly identifies CIM_IPProtocolEndpointBIGINTSnapshotID
A label by which the object is knownNVARCHAR(1024)Name
For future useNVARCHAR(256)ServiceCreationClassName
The value of CIM_ComputerSystem.Name with equal
NodeID
NVARCHAR(256)SystemName
Used for reporting purposesNVARCHAR(256)CreationClassName
The IPv4 address that this ProtocolEndpoint representsNVARCHAR(255)IPv4Address
The IPv6 address that this ProtocolEndpoint representsNVARCHAR(255)IPv6Address
666 Reference information