HP Systems Insight Manager 5.3 Technical Reference Guide

Solution: Remove one of the tools by using the mxtool command. See the manpage at mxtool(1M, 8) or
mxtool(4).
After exporting a command line tool from a previous version of HP SIM and importing the command into HP
SIM 5.1, there are two copies of the tool listed under Tools→Command Line Tools.
Solution: Remove one of the tools by using the mxtool command. See the manpage at mxtool(1M, 8) or
mxtool(4). Or, you can edit the tool definition and remove the guid="numerical value" attribute, and
modify the tool by using the mxtool command
I am unable to run SSA tools on the target system on which key is pushed before upgrade.
Solution: Run mxagentconfig on all target systems.
Command line tools created against a target system before upgrade fails to run after upgrade with error
message of SSH authentication failure.
Solution: Run mxagentconfig on all target systems.
HP VCRM
After upgrading from HP SIM 4.0 to 5.1, the HP VCRM setting is lost.
Solution: To resolve this issue, go to Options→HP VCRM and reselect the HP VCRM.
I cannot find a desired software component in HP SIM in its listing of a HP Version Control Repository Manager
software catalog. I know it exists in the selected HP VCRM, but I cannot find it in the displayed list.
Solution: It might be listed as a revision of another component with a slightly different name if the component
name has changed since a previous revision. If you still cannot find the component, you might want to browse
to the HP VCA on each individual system and install the component from there.
During the HP SIM installation, the HP VCRM fails to install.
Solution:
Use the following method to uninstall the HP VCRM. Rinstalling the HP VCRM over the existing HP VCRM
might continue to produce the error.
1. Select Start→Control Panel.
2. Double-click Add or Remove Programs. The Add or Remove Programs dialog box appears.
3. Scroll down and select the current HP Version Control Repository Manager.
4. Click Remove to uninstall the HP VCRM.
Virtual machine
JVM is shutting down.
Solution: This might happen if you have physically disconnected the CMS from your network. Restart HP
SIM, and the problem should resolve.
Virtual Machine Management Pack
The Virtual Machine Management Pack functions are not working in HP SIM.
Solution: Attempts to log in to the Virtual Machine Management Pack plug-in for HP SIM 4.x do not succeed
if the user name contains a character that is not alphanumeric.
WBEM Indications
When you get a FAILED to create indication subscription” message when Subscribing
for WBEM Events on HP-UX .
Solution: Be sure that the requirements are met and the software required to support indications is installed.
On the managed system:
For HP-UX 11.11 and 11.23:
• WBEMServices A.02.00.09 at a minimum.
HP VCRM 657