HP Systems Insight Manager 5.2 Update 2 Technical Reference Guide

Related topic
▲ WMI Mapper Proxy
Deleting a WMI Mapper Proxy
HP Systems Insight Manager (HP SIM) enables you to delete a Windows Management Instrumentation (WMI)
Mapper proxy. The delete option enables you to delete all selected proxies. Delete is available only if one
or more proxies are selected.
CAUTION: If you delete one or more WMI Mapper proxies, the deletion is permanent and the proxies
cannot be restored.
NOTE: You must have administrative rights to add, modify, or delete the WMI Mapper Proxy.
To delete a WMI Mapper Proxy:
1. Select Options→Protocol Settings→WMI Mapper Proxy.
2. Select the systems you want to delete.
Note: Sort by any column by clicking that column heading.
3. Click Delete.
A message appears, asking you to confirm your intention to delete the WMI Mapper Proxy.
4. Click OK to confirm your intention to delete the WMI Mapper Proxy, or click Cancel to cancel the
delete operation.
Related procedures
• Adding a WMI Mapper Proxy
• Editing a WMI Mapper Proxy
Related topic
▲ WMI Mapper Proxy
Protocols
You can use HP Systems Insight Manager (HP SIM) to set protocol settings for all systems , for a group of
systems, or for an individual system.
To set protocol settings for all systems, access the Global Protocol Settings page in one of the following
ways:
• Select Options→Protocol Settings→Global Protocol Settings.
• From the HP SIM introductory page, click Protocol Settings in the Do this now to finish the
installation section.
• From the Automatic Discovery - General Settings page, click Configure global protocol settings
in the Discovery configuration section.
NOTE: You can set some global protocol settings in the First Time Wizard. See “Using the First Time
Wizard” for more information.
To set protocol settings for a single system or group of systems, access the System Protocol Settings page
in one of the following ways:
• From the All Systems page, click the System Name link of the system to go to the System Page for
that system, and then click the System Protocol Settings link on the Tools & Links tab page.
• From the HP SIM menu, select Options→Protocol Settings→System Protocol Settings, and then
select the single system to set its protocol settings.
To set protocol settings for a single system:
Protocols 573