HP Systems Insight Manager 7.2 Technical Reference Guide

Table 46 Managing Communications (continued)
AccessDescriptionName
optimally configure systems for
manageability.
Updating communication statuses.Executes to get an updated
communication status.
Updating communication statuses
Printing Manage Communications table.Creates a printer-friendly version of
the list in a new window.
Printing Manage Communications
table
Manage communications quick repair
Procedure 270 Manage communications quick repair
1. Select Configure→Manage Communications. The Select Target Systems page appears.
2. Select target systems. See Creating a task.
3. Click Run Now. The System List appears.
4. Select the systems to be repaired.
5. Click Advise and Repair. The Advise and Repair section appears below the System List.
Related information
Identification tab
The Identification tab displays identification errors and recommendations for fixing the errors.
Identification communication status and errors are generated based on system type, the operating
system that the managed system is running, the availability of management protocols on the
managed systems, and if the protocol has a higher weight than other protocols. You can expand
each Causes and Recommendations section.
Procedure 271 Accessing the Identification tab
1. Select Configure→Manage Communications. The Select Target Systems page appears.
2. Click Run Now. The system list appears.
3. Select single or multiple systems from the systems list.
4. Select target systems. For more information, see Creating a task.
5. Click Advise and Repair. The Advise and Repair section appears.
6. Click the Identification tab.
Related information
Events tab
Includes detailed error messages and recommendtions for generating and receiving events. The
event error codes are captured and stored during data collection, identification, and status polling.
For HP Systems Insight Manager to receive events from managed systems, a WBEM subscription
must be created, or the CMS IP address must be in the SNMP trap destination list on the managed
system. You can expand each Causes and Recommendations section.
Procedure 272 Accessing the Events tab
1. Select Configure→Manage Communications. The Select Target Systems page appears.
2. Select target systems. For more information, see Creating a task.
3. Click Run Now. The system list appears.
4. Select single or multiple systems from the systems list.
5. Click Advise and Repair. The Advise and Repair section appears.
6. Click the Events tab.
Related information
396 Operations