HP Systems Insight Manager 7.2 Technical Reference Guide

Procedure 90 Configuring VME credentials
1. Click Show advanced protocol credentials.
2. To set VME system credentials, select the VME tab.
3. Enter the following:
• Protocol
Select the protocol from the dropdown list. The protocols listed are those being managed
under VME credentials. The list is based on the protocols that were registered by partner
applications. HP SIM can also register VME protocol types to be managed.
• Port #
• User name
• Password
• Confirm Password
4. (Optional) To add additional VME credentials, click Add, and then repeat step 3 above.
5. (Optional) To enter VME credentials for multiple systems, select Replace the selected system's
VME credentials with the following. From here, you can enter credentials for each system
individually.
6. To save changes and start identification in the background, click OK. To cancel changes, click
Cancel.
After you click OK, the credentials are validated against the virtual environment. If they are
found to be valid, a message is displayed stating the credentials are saved. After credentials
are validated, with no errors, they will be stored in the HP SIM database. If credentials fail,
an error message is displayed. Click the link to display the cause of the issue.
NOTE: When supplying credentials, you must follow the format below:
• Domain account: DOMAIN\administrator
• System name/address: Either the VME server host name or IP address
• Ports: The VME server web service port
NOTE: Removing the VME credentials will unregister the hosts that are registered with Insight
Control and managed by VME.
Related information
Related information
Related procedures
Global credentials
Sign-in credentials
SNMP credentials
SNMPv3 credentials
WS-Man credentials
Single sign on credentials
SSH credentials
WBEM credentials
System credentials 239