HP Systems Insight Manager 7.2 Technical Reference Guide

• Superdome 2 Onboard Administrator
• HP iLO 4
Identification
Table 22 Identification section
DescriptionField
The IP (including IPV6) address discovered for the system.Address
The name shown for the system. When available, it defaults
to the host name from DNS. You can override this setting
Preferred System Name
through the Edit System Properties link under the Tools &
Links tab.
The fully qualified DNS name, if available. Reverse DNS
lookups by IP address must be enabled and match a
forward lookup.
Network Name
A unique identifier from the agent or other instrumentation
on the system.
UUID
The serial number of the system.Serial Number
The product Number of the systemProduct number
This appears for Onboard Administrator
The IP address of the discovered system.Address
The name shown for the system. When available, it defaults
to the host name from DNS. You can override this setting
Preferred system name
through the Edit System Properties link under the Tools &
Links tab.
Product Description
Table 23 Product description section
DescriptionField
The basic system type returned from identificationSystem Type
The product model (name) defined by the manufacturerProduct Model
The description of the hardware obtained from the Edit
System Properties page
Hardware Description
The management protocols that have responded when
attempting to identify the system.
NOTE: If more protocols are expected, verify the
credentials configured on the System Protocol Settings
page.
Management Protocols
The system subtype returned from identificationSystem Subtype
This appears for Onboard Administrator
Displays embedded operating systemOS Name
This appears for Onboard Administrator
Displays embedded operating systemOS Type
This appears for Onboard Administrator
Displays embedded operating system versionOS Version
126 Screens and product layout