HP Systems Insight Manager 5.3 Technical Reference Guide

Related topic
▲ Managing Communications
Updating communication statuses
1. Select Configure→Manage Communications. The Select Target Systems page appears.
2. Select target systems. For more information, see “Creating a task”.
3. Click Update.
Related procedures
Related procedure
• Repairing managed system settings
• Printing Manage Communications table
Related topic
▲ Managing Communications
Printing Manage Communications table
1. Select Configure→Manage Communications. The Select Target Systems page appears.
2. Select target systems. For more information, see “Creating a task”.
3. Click Print.
4. When the table appears, select File→Print from the browser menu.
Because certain print options are not supported in HP SIM, you cannot perform the following tasks:
• Change the Orientation to Landscape in the Print dialog box (see Printing Problems in
“Troubleshooting” for a workaround to this issue)
• Cancel printing after the print job has been executed; however, you can access the operating systems
print queue and cancel the print job
• Print to a file
• Print specific selections; you can print the entire list only
• Print the table view page if you close the browser immediately after issuing a print request
Related procedures
• Repairing managed system settings
• Repairing managed system settings
• Updating communication statuses
Related topic
▲ Managing Communications
Firewall
A firewall might prevent HP SIM from communicating with the managed system. If a firewall is installed on
the managed system or between the HP SIM CMS and the managed system, then it must be configured to
allow management communication. The CMS must be able to make requests to and receive responses from
the managed system, and the managed system must be able to send alerts to the CMS.
Ports used by HP SIM that might need to be configured in a firewall
The following inbound ports must be open on each managed system:
ProtocolPortDescription
ICMPICMPPing Discovery (ICMP)**
HTTPTCP 80Ping Discovery (TCP)**
SSHTCP 22SSH port++
Managing Communications 401