HP Systems Insight Manager 5.3 Technical Reference Guide

3. Find each <execute-as-user> line in the XML file and change Admin to the user account specified
in step 1.
4. Run mxtool -m -f MpTools.xml -x force.
5. On the CMS, run mxagentconfig or the Deploy SSH Public Key tool to copy the authentication keys
for this user account to each managed iLO. For more information about deploying the SSH public key,
see “Deploying SSH public keys to management processors”.
Related procedures
• Creating new users on management processors
• Editing management processor users
Configuring LAN access on management processors
1. Select Configure→Management Processor→HP Integrity and HP 9000 iLO→LAN Access. The
LAN Access page appears.
2. Select target management processors, and then click Next. For information about selecting targets, see
“Creating a task”. The Step 2: Enter LAN access settings page appears.
3. Under Select the settings you wish to configure and choose their values, select from:
• Telnet access Select Enable or Disable. This does not affect the IP configuration or the ability
of the management processor to perform upgrades over the LAN.
• Web SSL Select Enable or Disable.
• Web console port If you select this option, enter a valid port number. Valid port numbers are 23
and 2000 through 2400.
• IPMI over LAN access Select Enable or Disable.
4. Click Run Now to run the task immediately, click Schedule to schedule when the task runs, or click
Previous to return to the previous LAN access page. For information about scheduling a task, see
“Scheduling a task” .
Configuring LDAP settings on management processors
1. Select Configure→Management Processor→HP Integrity and HP 9000 iLO→LDAP Settings. The
LDAP Settings page appears.
2. Select target management processors, and then click Next. For information about selecting targets, see
“Creating a task”. The Step 2: Enter LDAP directory settings page appears.
3. Under Select the settings you wish to configure and choose their values, select from the following:
• Local user accounts Select Enable or Disable. If local user accounts are enabled, you can log
in to iLO using locally stored user credentials. If local user accounts are disabled, user access is
limited to valid directory credentials only.
• Directory authentication Select Enable or Disable. If directory authentication is enabled and
configured properly, users can log into the iLO system using directory credentials. If this is disabled,
user credentials are not validated using the directory.
• Directory server IP address Enter the IP address of the directory server.
• Directory server LDAP port Enter the LDAP for secure LDAP service on the server. The default
value is 636.
• Distinguished name Specifies where this iLO instance is listed in the directory tree (for example:
cn=MP Server.ou=Management Devices.o=hp ).
• User search context 1 Specify a contact to apply to the login name entered to access the iLO
system.
390 Tools that extend management