HP Systems Insight Manager 5.2 Update 2 Technical Reference Guide

NOTE: If you have systems that have both SNMP and WBEM Serviceguard cluster awareness agents

installed and you previously ran HP SIM 4.x, you must run discovery again for Serviceguard cluster information

to be obtained through WBEM.

You can access HP Serviceguard Manager through one of the following methods:

• From the system table view page, select a system that is an HP Serviceguard Cluster. HP SIM searches

the database for the first system that belongs to the cluster and Serviceguard Manager is launched with

that system.

• From the system table view page, click a container system that has a cluster member. The cluster member

is passed to Serviceguard Manager. You can also select the row that includes the container system and

launch Serviceguard Manager from the menu by selecting Tools→Integrated Consoles→HP

Serviceguard Manager.

• From the system table view page, click a cluster node. The cluster node is passed to Serviceguard

Manager. You can also select the row that includes the container system and then launch Serviceguard

Manager from the menu by selecting Tools→Integrated Consoles→HP Serviceguard Manager.

• Access the HP Serviceguard Manager page by selecting Tools→Integrated Consoles→HP

Serviceguard Manager. The HP Serviceguard Manager page appears.

NOTE: If you have not used HP Serviceguard Manager before HP SIM 5.0, you can download the latest

version from: http://www.hp.com/go/softwaredepot and click HP Serviceguard Manager. When you

install HP Serviceguard Manager, it recognizes HP SIM and automatically registers it for you. If you used

HP Service Manager 4.02 with previous versions of HP SIM, when you upgrade to HP SIM to 5.0, the tool

HP Serviceguard Manager 4.02 is still available.

See http://h20293.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=B8325BA for

more information and to download the software.