HP Systems Insight Manager 5.2 Update 2 Technical Reference Guide

Related procedure
▲ Powering on a system managed by an HP ProLiant iLO
Turning on the UID for a system managed by an HP ProLiant iLO
This tool enables you to turn on the Unit Identification Light (UID) on an HP ProLiant Integrated Lights Out
(iLO) system.
To turn off the UID:
1. Select Tools→Management Processor→HP ProLiant iLO→Turn On Unit Identification Light.
The Turn On Unit Identification Light page appears.
2. Select target system, and then click Next. See “Creating a task” for information about selecting targets.
The Step 2: Task confirmation page appears.
3. Click Run Now to run the task immediately. Click Schedule to schedule the task to run at another time,
or click Previous to return to the previous Turn On Unit Identification Light page. See “Scheduling
a task” for more information about scheduling a task.
Related procedure
▲ Turning off the UID for a system managed by an HP ProLiant iLO
Turning off the UID for a system managed by an HP ProLiant iLO
This tool enables you to turn of the Unit Identification Light (UID) on an HP ProLiant Integrated Lights Out
(iLO) system.
To turn off the UID:
1. Select Tools→Management Processor→HP ProLiant iLO→Turn Off Unit Identification Light.
The Turn Off Unit Identification Light page appears.
2. Select target system, and then click Next. See “Creating a task” for information about selecting targets.
The Step 2: Task confirmation page appears.
3. Click Run Now to run the task immediately. Click Schedule to schedule the task to run at another time,
or click Previous to return to the previous Turn Off Unit Identification Light page. See “Scheduling
a task” for more information about scheduling a task.
Related procedure
▲ Turning on the UID for a system managed by an HP ProLiant iLO
Managing Communications
The Manage Communications feature enables you to troubleshoot communication problems between the
Central Management Server (CMS) and targeted systems. For each failed communication function,
troubleshooting information is available. You can reconfigure certain communication settings, launch agents,
and push certificates to target systems. This feature is available from the Configure→Manage
Communications menu and includes the following information:
• Communication status
• Manage Communications table columns
• Manage Communications main page buttons
Managing Communications 377