HP Systems Insight Manager 7.2 Technical Reference Guide

Navigating the icon view
The icon view lists the system name of all discovered systems, as well as the system health status
for each system. The legend shows how many systems in the view are Critical, Major, Minor,
Normal, Disabled, and Unknown. Select the checkbox next to system name to select a system. You
can select more than one system, or to select an entire collection, select the checkbox, Select
"collection name" itself.
Place your cursor over the status icon to display status details. The status values are dependent on
what agents are installed on the target system (WBEM or SNMP). The system name and overall
status appears at the top of the flyover box. All Critical, Major, Minor, or Warning status types
with informational text appear following the system name. Both the system name and overall status
icons drill down to the appropriate system overview page. The System status details also takes
you to the system overview page. The WBEM status icon represents the status of the system as a
whole. This status is not simply a rollup of the worst of the subsystems. Instead, each subsystem
that participates in the overall status calculates a status that contributes to the overall status. Since
it is possible for a subsystem to be in a failed state but the server to remain functional, the statuses
might not match. For a system that does not have the SNMP agent installed, the flyover includes
HTTP, Ping, Serviceguard, and SNMP statuses only. Ping appears for both WBEM and SNMP. If
the HTTP protocol is supported on the system, the HTTP status appears as a link. Ping and HTTP
statuses do not appear for management processors. If the system is a container (rack, enclosure,
complex, or cluster), the status value is the status of the container itself and does not include the
status of the children. If the status components that make up the overall hardware status are not
known, the status of the container itself appears (complexes and clusters). There is a status for the
management processor and a status for the server for an management processor with an SNMP
pass-through. The flyover displays which status type is causing the problem in the server. To close
the box, click Close in the upper right corner.
This page includes the following sections:
1. Tabs
2. Quick Launch
3. View as
4. System health status summary
5. Icon view buttons
Navigating the icon view 95