HP Systems Insight Manager 7.2 Technical Reference Guide

2. Click Run Now to run the task immediately, click Schedule to schedule when the task runs, or
click Previous to return to the previous LAN access page. For information about scheduling a
task, see Scheduling a task
Configuring LDAP settings on management processors
Procedure 261 Configuring HP Integrity and HP 9000 management processor LDAP settings
1. Under Select the settings you wish to configure and choose their values, select from the
following:
• Local user accounts
Select Enable or Disable. If local user accounts are enabled, you can log in to a
management processor using locally stored user credentials. If local user accounts are
disabled, user access is limited to valid directory credentials only.
• Directory authentication
Select Enable or Disable. If directory authentication is enabled and configured properly,
users can log into the management processor system using directory credentials. If this
is disabled, user credentials are not validated using the directory.
• Directory server IP address
Enter the IP address of the directory server.
• Directory server LDAP port
Enter the LDAP for secure LDAP service on the server. The default value is 636.
• Distinguished name
Specifies where this management processor instance is listed in the directory tree (for
example: cn=MP Server.ou=Management Devices.o=hp).
• User search context 1
Specify a contact to apply to the login name entered to access the management processor
system.
• User search context 2
Specify a context to apply to the login name entered to access the management processor
system.
• User search context 3
Specify a context to apply to the login name entered to access the management processor
system.
2. Click Run Now to run the task immediately, click Schedule to schedule when the task runs, or
click Previous to return to the previous LDAP Settings page. For more information about
scheduling a task, see Scheduling a task.
Executing internal control actions through management processors
Procedure 262 HP Integrity and HP 9000 management processor Control
1. On the Step 2: Select one or more actions page, select one or both options:
• Clear event logs
Clears the system event logs.
• Reset management processor
Executes a reset of the management processor.
392 Operations