HP Systems Insight Manager 7.2 Technical Reference Guide
Using Cluster Monitor
Procedure 232 Cluster Monitor
1. Access the Cluster Monitor page by using one of the following methods:
• Method 1:
1. Select Tools→System Information→Cluster Monitor.
NOTE: If no MSCS clusters are discovered, Cluster Monitor is not listed in the menu.
2. Select a target MSCS cluster, and then click Run Now. See Creating a task for more
information about selecting a target cluster.
• Method 2:
1. Locate a cluster by expanding Systems under the System and Event Collections panel
and selecting a cluster collection.
The appropriate cluster collection table appears in the workspace.
NOTE: Only MSCS clusters you are authorized to access appear on the cluster
table view page.
2. Choose one of the following:
◦ In the Cluster Name column, click the name of the MSCS cluster.
◦ In the CS column on the cluster table view page, click the MSCS cluster status
icon.
The Cluster Monitor page appears for that cluster.
2. Select from the following tabs available on the Cluster Monitor page. Every tab includes a
Problem Info section that provides details about problems reported on the tab. For example,
on the Cluster tab, this section includes status information if the cluster has a status of anything
other than Normal.
Each tab also includes a Last Updated field that displays the last time the information on the
tab was updated.
• Cluster
Use to view cluster information such as the cluster status, name, IP address, and quorum.
• Nodes
Use to view node information such as the node status, name, and IP address.
• Network
Use to view network information such as the network status, name, mask, state, role, and
description.
• Resources
Use to view MSCS Resource information for the cluster, including the status, name, IP
address, state, group, owner node, type, and drive of the resources.
Configuring cluster resource settings
Procedure 233 Configuring Custer Resource Settings
1. Configure MSCS clusters by selecting ALL (MSCS) from the Cluster Type list.
2. From the Resource list, select MSCS.
Using Cluster Monitor 347