HP Systems Insight Manager 7.2 Technical Reference Guide

Procedure 197 Running predefined reports
1. Select Reports→Enhanced Reports.... The Enhanced Reports, Reports by Product page appears.
2. Click the to expand a product group to reveal available reports. Available reports appear
below the selected product group.
3. Select an available report to run.
4. Select a format for the generated report from Format for generated report:
• HTML (Recommended for viewing)
• CSV
• PDF
5. Click Run Report.
The Select Parameters page appears.
6. Depending on the report selected, you might have to choose parameters before the report
displays. Some possible parameters are:
• Date range
• Group type
• System type
• Operating systems
321
Value pane. Displays
the available
Selection buttons. The
three selection options
from the left:
Parameters selections.
Click the left arrow to
expand the window
and display the
parameter options.
parameters for the
current report.
• Select all values
• Select no values
• Search the list of
values
7. Click OK to display the report. Click Reset to reset all parameters and make new selections.
HP SIM SmartMemory support is available for Gen8 systems with their DIMM updated SmartMemory
and below are additional attributes added in HP SIM Enhanced Reports to support SmartMemory:
• SmartMemory
Indicates DIMM is updated with SmartMemory (DIMMS with Smart Memmory or DIMMS
without SmartMemory)
• Maximum Frequency
Maximum frequency
318 Operations