HP Systems Insight Manager 7.2 Technical Reference Guide

Setting up managed systems from an HP-UX CMS
Procedure 44 Setting up managed systems from an HP-UX Central Management ServerCMS
1. Understand the basic managed system software for HP-UX.
For HP-UX, the following software, shown with minimum recommended versions, is required
for essential HP SIM functionality to operate. This software is installed by default as part of
the latest HP-UX 11i v2 operating environments, but you might have to install or update it on
HP-UX 11i v1 or older HP-UX 11i v2 environments.
• T1471AA HP-UX Secure Shell
• B8465BA HP WBEM Services for HP-UX
The iCAP properties for cells and processors for a complex is collected and displayed, using
HP-UX WBEM. For HP-UX, the following software is required for essential HP SIM functionality
to operate. This software is installed by default as part of the latest HP-UX 11i v3 (11.31), HP-
UX 11i v2 (11.23), which can be installed on HP 9000 or HP Integrity servers, and HP-UX
11i v1 (11.11), which can only be installed on HP 9000 servers.
• B9073BA version 08.01.01 iCAP for HP-UX
NOTE: WBEM providers is only collected under the WBEM.
This WBEM Services bundle contains basic system instrumentation displayed in the HP SIM
Property pages, supporting collection and reporting by HP SIM inventory functionality. To
maximize the value of HP SIM for properties, inventory, and events, see http://www.hp.com/
go/hpsim/providers for the latest WBEM Services bundle.
For the latest WBEM Services bundle, go to http://www.hp.com/go/hpsim/providers.
2. Ensure the managed system software is installed.
To verify that the minimum required software is installed, log in to the remote system, and run
the following command:
$ swlist –l bundle T1471AA B8465BA OpenSSL
To verify that the optional providers and HP System Management Homepage are installed,
run commands such as:
$ swlist –l bundle LVMProvider WBEMP-LAN-00 SysMgmtWeb SysFaultMgmt
OnlineDiag
3. Acquire and install the managed system software if not previously installed.
The SSH and WBEM bundles are included on the HP-UX Operating Environment and
Application Release media, as well as part of the HP SIM HP-UX depot downloaded from
http://h18013.www1.hp.com/products/servers/management/hpsim/dl_hpux.html.
For the WBEM providers, see http://h18013.www1.hp.com/products/servers/management/
hpsim/dl_hpux.html .
After you have obtained the depots containing the software, you can install then from the
managed system:
$ swinstall –s <depot_location> OpenSSL
NOTE: B8465BA and B9073BA version 08.01.01 depends on OpenSSL, so you must install
OpenSSL first.
$ swinstall –s <depot_location> T1471AA
$ swinstall –s <depot_location> B8465BA
$ swinstall –s <depot_location> <names of WBEM providers being
installed>
188 Operations