HP Systems Insight Manager 7.2 Technical Reference Guide

Viewing racks
NOTE: For c-Class systems (blades and switches in an enclosure) to appear in BladeSystem
Integrated Manager tree or picture view, at least one Onboard Administrator in that enclosure
must be discovered before or after the devices. The systems can be discovered in HP SIM but do
not appear in BladeSystem Integrated Manager tree or picture view if none of the Onboard
Administrators are discovered.
NOTE: Any change in the physical configuration of the c-Class enclosure, such as moving the
systems from one slot to another or removing a system, requires re-identification of the Onboard
Administrator.
Viewing enclosures
The picture view page for enclosures contains a diagram of the discovered systems in the enclosure
if available. The enclosure name appears along with a picture view, table view, or iconic view of
the enclosure. While signed in to Systems Insight Manager (HP SIM), placing your cursor over a
server shown in the view, displays information on that particular server, including server blade
name, andslot number You can also click a server name to display information about the server.
The System Page appears.
The following systems are displayed in the picture view for racks and enclosures:
• Servers, desktops and workstation blades
• Interconnect modules
Slots that have no server or desktop identified and no interconnect switch identified are also
displayed in the picture view for enclosures.
The following sections are displayed in the picture view for racks and enclosures:
• System Status
◦ Health Status icon. Represents the health of a system including Critical, Major, Minor, or
Normal.
• Identification
Serial Number. Displays the serial number of the enclosure.◦
◦ UUID. A unique identifier from the agent or other instrumentation on the system.
◦ Rack Name. Click to display the rack in picture view.
◦ Unit ID (LED). Indicates whether the Unit ID is on or off.
◦ Onboard Administrator - Click the Onboard Administrator link to display the Onboard
Administrator home page.
NOTE: The Onboard Administrator link appears only for c-Class enclosures.
◦ Virtual Connect Manager. Displays the IP address to the HP Virtual Connect Enterprise
Manager. You can click the IP address to access the VCEM system.
NOTE: This option appears only when a Virtual Connect is available.
◦ Virtual Connect Manager Domain Name. Displays the VCEM domain name. Click the
domain name to view the System page of the VC Domain.
104 Screens and product layout