Integrating HP Insight Management WBEM (WMI) Providers for Windows with HP System Insight Manager, 4th edition

15
Figure 14 shows the iLO4 Management page.
Figure 14: Disable Embedded Agent Management in iLO4.
Configuring the WMI Mapper in HP SIM
You must configure the WMI Mapper service to run with HP SIM.
HP SIM WMI Mapper service
HP SIM supports industry-standard protocols such as WBEM. WMI Mapper 2.4 gives you a two-way
translation from WMI (a DCOM-based interface) to a standardized WBEM interface (CIM XML/HTTP
(2)). HP SIM requires WMI Mapper to manage Windows computers, including ProLiant servers
running the HP WBEM Providers. The WMI Mapper service runs separately from the HP SIM service.
WMI Mapper configuration
HP SIM supports two different configurations for the WMI Mapper:
• Co-hosted on the HP SIM Central Management Server (CMS)
• Installed on a stand-alone Windows server
WMI Mapper installation preparation
If you install HP WBEM Providers on a Windows platform, the system installs WMI Mapper as an
optional component. For more information, see “HP Systems Insight Manager 7.0 Installation and
Configuration Guide for MS Windows”:
http://h18013.www1.hp.com/products/servers/management/hpsim/infolibrary.html#b2.
Installing WMI Mapper on a different server than HP SIM requires these steps: