Managing ProLiant servers with Linux HOWTO

Appendix C – hp-snmp-agents command lines and

arguments

Table 16 lists the command lines and Table 17 lists the command arguments for hp-snmp-agents.

Table 16. Command lines for hp-snmp-agents

Component Description Command

Server Agents

cmahostd Host daemon to collect data about installed

software, firmware, and agent conditions

/opt/hp/hp-snmp-agents/server/etc/cmahostd

cmapeerd Host daemon collected data made available to

SNMP requesters

/opt/hp/hp-snmp-agents/server/etc/cmapeerd

cmathreshd Daemon to monitor MIB items to exceed a certain

threshold

/opt/hp/hp-snmp-

agents/server/etc/cmathreshd

cmahealthd Host daemon to collect temperature /opt/hp/hp-snmp-

agents/server/etc/cmahealthd

cmastdeqd Host daemon to collect PCI/EISA slot information /opt/hp/hp-snmp-

agents/server/etc/cmastdeqd

cmaperfd Daemon to collect performance data for CPU /opt/hp/hp-snmp-agents/server/etc/cmaperfd

cmasm2d Agent to collect data from iLO/RILOE /opt/hp/hp-snmp-agents/server/etc/cmasm2d

cmarackd Agent to collect data from the ICE infrastructure /opt/hp/hp-snmp-agents/server/etc/cmarackd

Storage Agents

cmaidad Agent to collect data from cciss/cpqarray drivers /opt/hp/hp-snmp-agents/storage/etc/cmaidad

cmaided Agent to collect data from IDE devices /opt/hp/hp-snmp-agents/storage/etc/cmaided

cmafcad Agent to collect data from the cpqfc driver /opt/hp/hp-snmp-agents/storage/etc/cmafcad

cmascsid Agent to collect data from SCSI storage devices /opt/hp/hp-snmp-

agents/storage/etc/cmascsid

cmasasd Agent to collect data from SAS storage devices /opt/hp/hp-snmp-agents/storage/etc/cmasasd

Network Agents

cmanicd Agent to collect data from network interfaces /opt/hp/hp-snmp-agents/nic/etc/cmanicd

Note: All agents support -p, -s, -t as startup parameters.

Note: Each agent has an associated run level script which is located in /opt/hp/hp-snmp-

agents/<agent>>/etc/<subagent>. All important settings such as poll time arguments are contained in these individual

scripts.