Managing ProLiant servers with Linux HOWTO

20
The cpqriisd service acts as an enabler for other ProLiant value-add software, such as the Rack Agent
and the Rack Upgrade Utility. This service is only applicable for p-Class blade systems.
If the service goes away after a few seconds, there is a failure to initiate communication with the iLO
management controller. The failure reason is logged in the message log. If the service is stopped,
dependent applications like the Rack Firmware Upgrade Utility terminate as well.
Table 13 lists possible issues.
Table 13. cpqriisd messages
Message
number
Details
Message 1 Could not setup server semaphores
Could not destroy server semaphores
Up sem: Ioctl Failure !
Down sem: Ioctl Failure !
Down sem
Down sem: Ioctl Failure !
Down sem
get sem: Ioctl Failure !
set sem: Ioctl Failure !
Description These messages indicate that synchronization objects, called "semaphores," cannot be
set up correctly. This issue most likely occurs because the iLO driver is absent.
Recommended
action
Install the iLO driver.
Message 2 Warning: Shared Memory Segment exists
Killing process %s pid %d pgid %d
Description These messages indicate that the daemon encountered a shared memory segment that
was not cleaned up properly.
Recommended
action
No action is required, since this message is informational. This warning will be
removed in a later version of the Rack Infrastructure Interface Service.
Message 3 Multiple copies of this daemon may be running - exiting...
Description This message indicates an issue with Version 1.0.0 of the Rack Infrastructure Interface
Service, which disallows the starting of two copies of the service.
Recommended
action
Only one copy of the daemon should be running at any time.
Message 4 Setup Shared Memory failed!
Description This message indicates that a common OS resource, "shared memory," is not
available. This issue could be due to high utilization, but most likely a memory segment
from an earlier version of this service was left behind erroneously.
Recommended
action
Install the latest version of this service.
Issue 5 Semaphore %s interrupted in %s
Local Semaphore %s interrupted in %s
Description This type of message will be logged if the service is terminated abruptly (for example,
through the kill command).