Linux Trap ID and SNMP Traps Reference Guide For use with SmartStart version 8.30

Page 47 of 53
[cpqRackCommonEnclosureName], in rack [cpqRackName].”
22031 - cmahealthd
Log message: “Power subsystem DC power problem.”
SNMP trap: cpqRackPowerChassisDcPowerProblem - 22031 in CPQRACK.MIB
Symptom: Power subsystem DC power problem. There is a power subsystem DC power problem for this
power enclosure.
User action: Check the power enclosure and power supplies. Replace any failed or degraded power
supplies.
Supporting SNMP trap data:
 sysName
 cpqHoTrapFlags
 cpqRackName
 cpqRackUid
 cpqRackCommonEnclosureName
 cpqRackCommonEnclosureSerialNum
 cpqRackCommonEnclosureSparePartNumber
 cpqRackCommonEnclosu reTrapSequenceNu m
Supporting SNMP trap description: “Power subsystem DC power problem in enclosure
[cpqRackCommonEnclosureName], in rack [cpqRackName].”
22032 - cmahealthd
Log message: “Power subsystem AC facility input power exceeded.”
SNMP trap: cpqRackPowerChassisAcFacilityPowerExceeded - 22032 in CPQRACK.MIB
Symptom: Power subsystem AC facility input power exceeded for this power enclosure.
User action: Check the power enclosure and power supplies. Replace any failed or degraded power
supplies.
Supporting SNMP trap data:
 sysName
 cpqHoTrapFlags
 cpqRackName
 cpqRackUid
 cpqRackCommonEnclosureName
 cpqRackCommonEnclosureSerialNum
 cpqRackCommonEnclosureSparePartNumber
 cpqRackCommonEnclosu reTrapSequenceNu m
Supporting SNMP trap description: “Power subsystem AC facility input power exceeded in enclosure
[cpqRackCommonEnclosureName], in rack [cpqRackName].”
22033 - cmahealthd
Log message: “Unknown power consumption”
SNMP trap: cpqRackPowerUnknownPowerConsumption - 22033 in CPQRACK.MIB
Symptom: Unknown power consumption. There is an unknown power consumer drawing power.
User action: Check the power enclosure and power supplies. Replace any failed or degraded power
supplies.
Supporting SNMP trap data:
 sysName
 cpqHoTrapFlags
 cpqRackName
 cpqRackUid
 cpqRackCommonEnclosureSerialNum
 cpqRackCommonEnclosu reTrapSequenceNu m
Supporting SNMP trap description: “Unknown power consumption in rack [cpqRackName].”
22034 - cmahealthd