Linux Trap ID and SNMP Traps Reference Guide For use with SmartStart version 8.30

Page 44 of 53
 cpqHoTrapFlags
 cpqRackName
 cpqRackUid
 cpqRackServerBladeEnclosu reName
 cpqRackServerBladePosition
 cpqRackServerBladeSparePartNumber
 cpqRackCommonEnclosureSerialNum
 cpqRackCommonEnclosu reTrapSequenceNum
Supporting SNMP trap description: “Server power on prevented to preserve redundancy in blade
[cpqRackServerBladePosition], in enclosure [cpqRackServerBladeEnclosureName], in rack
[cpqRackName].”
22023 - cmahealthd
Log message: “Server power on prevented inadequate power to power on.”
SNMP trap: cpqRackServerPowerOnFailedNotEnoughPower - 22023 in CPQRACK.MIB
Symptom: Inadequate power to power on. There is not enough power to power on the server blade.
User action: Check power connections or add power supplies.
Supporting SNMP trap data:
 sysName
 cpqHoTrapFlags
 cpqRackName
 cpqRackUid
 cpqRackServerBladeEnclosu reName
 cpqRackServerBladePosition
 cpqRackServerBladeSparePartNumber
 cpqRackCommonEnclosureSerialNum
 cpqRackCommonEnclosu reTrapSequenceNu m
Supporting SNMP trap description: “Inadequate power to power on blade [cpqRackServerBladePosition],
in enclosure [cpqRackServerBladeEnclosureName], in rack [cpqRackName].”
22024 - cmahealthd
Log message: “Server power on prevented server enclosure micro-controller not found.”
SNMP trap: cpqRackServerPowerOnFailedEnclosureNotFound - 22024 in CPQRACK.MIB
Symptom: Inadequate power to power on. There is not enough power to power on the server blade.
The server enclosure micro-controller was not found.
User action: Check server enclosure connections or add power supplies.
Supporting SNMP trap data:
 sysName
 cpqHoTrapFlags
 cpqRackName
 cpqRackUid
 cpqRackServerBladeEnclosu reName
 cpqRackServerBladePosition
 cpqRackServerBladeSparePartNumber
 cpqRackCommonEnclosureSerialNum
 cpqRackCommonEnclosu reTrapSequenceNu m
Supporting SNMP trap description: “Inadequate power to power on blade [cpqRackServerBladePosition],
in enclosure [cpqRackServerBladeEnclosureName], in rack [cpqRackName].”
22025 - cmahealthd
Log message: “Server power on prevented power enclosure micro-controller not found.”
SNMP trap: cpqRackServerPowerOnFailedPowerChassisNotFound - 22025 in CPQRACK.MIB
Symptom: Inadequate power to power on. There is not enough power to power on the server blade. The
power enclosure micro-controller was not found.