Linux Trap ID and SNMP Traps Reference Guide For use with SmartStart version 8.30

Page 42 of 53
Supporting SNMP trap description: “The power supply [cpqRackPowerSupplyPosition] in enclosure
[cpqRackPowerSupplyEnclosureName] in rack [cpqRackName] has been set to Failed.”
22016 - cmahealthd
Log message: “Rack power supply removed”
SNMP trap: cpqRackPowerSupplyRemoved - 2201 6 in CPQRACK.MIB
Symptom: The power supply has been removed.
User action: None required
Supporting SNMP trap data:
 sysName
 cpqHoTrapFlags
 cpqRackName
 cpqRackUid
 cpqRackPowerSupplyEnclosureName
 cpqRackPowerSupplySerialNum
 cpqRackPowerSupplyPosition
 cpqRackPowerSupplyFWRev
 cpqRackPowerSupplySparePartNumber
 cpqRackCommonEnclosureSerialNum
 cpqRackCommonEnclosu reTrapSequenceNu m
Supporting SNMP trap description: “The power supply [cpqRackPowerSupplyPosition] in enclosure
[cpqRackPowerSupplyEnclosureName] in rack [cpqRackName] has been removed.”
22017 - cmahealthd
Log message: “Rack power supply inserted”
SNMP trap: cpqRackPowerSupplyInserted - 22017 in CPQRACK.MIB
Symptom: The power supply has been inserted.
User action: None required
Supporting SNMP trap data:
 sysName
 cpqHoTrapFlags
 cpqRackName
 cpqRackUid
 cpqRackPowerSupplyEnclosureName
 cpqRackPowerSupplySerialNum
 cpqRackPowerSupplyPosition
 cpqRackPowerSupplyFWRev
 cpqRackPowerSupplySparePartNumber
 cpqRackCommonEnclosureSerialNum
 cpqRackCommonEnclosu reTrapSequenceNu m
Supporting SNMP trap description: “The power supply [cpqRackPowerSupplyPosition] in enclosure
[cpqRackPowerSupplyEnclosureName] in rack [cpqRackName] has been inserted.”
22018 - cmahealthd
Log message: “Rack power supply not redundant”
SNMP trap: cpqRackPowerSubsystemNotRedundant - 2201 8 in CPQRACK.MIB
Symptom: The rack power subsystem is no longer in a redundant state.
User action: Replace any failed power supplies as soon as possible to return the system to a redundant
state.
Supporting SNMP trap data:
 sysName
 cpqHoTrapFlags
 cpqRackName
 cpqRackUid