Linux Trap ID and SNMP Traps Reference Guide For use with SmartStart version 8.30

Page 41 of 53
22003 - cmarackd
Log message: “Enclosure removed”
SNMP trap: cpqRackEnclosureRemoved - 22003 in CPQRACK.MIB
Symptom: The enclosure has been removed. An enclosure has been removed from the rack.
User action: None
Supporting SNMP trap data:
 sysName
 cpqHoTrapFlags
 cpqRackName
 cpqRackUid
 cpqRackCommonEnclosureName
 cpqRackCommonEnclosureModel
 cpqRackCommonEnclosureSerialNum
 cpqRackCommonEnclosureSparePartNumber
 cpqRackCommonEnclosu reTrapSequenceNu m
Supporting SNMP trap description: “The enclosure [cpqRackCommonEnclosureName] has been
removed from rack [cpqRackName].”
22004 - cmarackd
Log message: “Enclosure inserted”
SNMP trap: cpqRackEnclosureInserted - 22004 in CPQRACK.MIB
Symptom: The enclosure has been inserted. An enclosure has been inserted into the rack.
User action: None
Supporting SNMP trap data:
 sysName
 cpqHoTrapFlags
 cpqRackName
 cpqRackUid
 cpqRackCommonEnclosureName
 cpqRackCommonEnclosureModel
 cpqRackCommonEnclosureSerialNum
 cpqRackCommonEnclosureSparePartNumber
 cpqRackCommonEnclosu reTrapSequenceNu m
Supporting SNMP trap description: “The enclosure [cpqRackCommonEnclosureName] has been inserted
into rack [cpqRackName].”
22013 - cmarackd
Log message: “Rack power supply failed”
SNMP trap: cpqRackPowerSupplyFailed - 22013 in CPQRACK.MIB
Symptom: The power supply status has been set to Failed. A power supply has failed.
User action: Replace the power supply as soon as possible.
Supporting SNMP trap data:
 sysName
 cpqHoTrapFlags
 cpqRackName
 cpqRackUid
 cpqRackPowerSupplyEnclosureName
 cpqRackPowerSupplySerialNum
 cpqRackPowerSupplyPosition
 cpqRackPowerSupplyFWRev
 cpqRackPowerSupplySparePartNumber
 cpqRackCommonEnclosureSerialNum
 cpqRackCommonEnclosu reTrapSequenceNu m