Linux Trap ID and SNMP Traps Reference Guide For use with SmartStart version 8.30

Page 38 of 53
 Supporting SNMP trap data:
 sysName
 cpqHoTrapFlags
 cpqHeResMem2BoardSlotNum
 cpqHeResMem2BoardCpuNum
 cpqHeResMem2BoardRiserNum
Supporting SNMP trap description: “Memory Board or Cartridge Bus Error Detected in
Slot[cpqHeResMem2BoardSlotNum] , Cpu[cpqHeResMem2BoardCpuNum],
Riser[cpqHeResMem2BoardRiserNum]."
6068 - cmahealthd
Log message: "The Advanced Memory Protection subsystem has engaged the LockStep memory."
SNMP trap: cpqHeResilientMemLockStepMemoryEngaged - 6068 in CPQHLTH.MIB
Symptom: Advanced Memory Protection LockStep Engine Memory Engaged. The Advanced Memory
Protection subsystem has detected a memory fault. The LockStep engine has been activated.
User action: Replace the faulty memory.
Supporting SNMP trap data:
 sysName
 cpqHoTrapFlags
Supporting SNMP trap description: "The Advanced Memory Protection subsystem has engaged the
LockStep memory."
6069 - cmahealthd
Log message: "The fault tolerant power supply AC power loss for the specified chassis and bay location."
SNMP trap: cpqHe4FltTolPowerSupplyACpowerloss - 6069 in CPQHLTH.MIB
Symptom: The fault tolerant power supply in the specified chassis and bay reported AC power loss.
User action: Check the power connection to the power supply.
Supporting SNMP trap data:
 sysName
 cpqHoTrapFlags
 cpqHeFltTolPowerSupplyChassis
 cpqHeFltTolPowerSupplyBay
 cpqHeFltTolPowerSupplyStatus
 cpqHeFltTolPowerSupplyModel
 cpqHeFltTolPowerSupplySerialNumber
 cpqHeFltTolPowerSupplyAutoRev
 cpqHeFltTolPowerSupplyFirmwareRev
 cpqHeFltTolPowerSupplySparePartNum
 cpqSiServerSystemId
 Supporting SNMP trap description: " The Power Supply AC power loss in
[cpqHeFltTolPowerSupplyChassis], Bay [cpqHeFltTolPowerSupplyBay], Status
[cpqHeFltTolPowerSupplyStatus], Model [cpqHeFltTolPowerSupplyModel], Serial Num
[cpqHeFltTolPowerSupplySerialNumber], Firmware [cpqHeFltTolPowerSupplyFirmwareRev]."
9003 - cmasm2d
Log message: “The Remote Insight firmware has detected unauthorized login attempts”
SNMP trap: cpqSm2UnauthorizedLoginAttempts - 9003 in CPQSM2.MIB
Symptom: Remote Insight/Integrated Lights-Out Unauthorized Login Attempts. The Remote
Insight/Integrated Lights-Out firmware has detected unauthorized login attempts.
Supporting SNMP trap data:
 sysName
 cpqHoTrapFlags
 cpqSm2CntlrBadLoginAttemptsThresh
Supporting SNMP trap description: “More than [cpqSm2CntlrBadLoginAttemptsThresh] unauthorized
login attempts detected.”