Linux Trap ID and SNMP Traps Reference Guide For use with SmartStart version 8.30

Page 29 of 53
6022 - cmahealthd
Log message: “A non-operational system fan has returned to normal operation.”
SNMP trap: cpqHe3ThermalSystemFanOk – 6022 - CPQHLTH.MIB
Log message: "System fan has returned to normal operation."
Supporting SNMP trap data:
 sysName
 cpqHoTrapFlags
Supporting SNMP trap description: “System fan has returned to normal operation.”
6023 - cmahealthd
Log message: “A processor fan is not operating normally. The system will be shutdown.”
SNMP trap: cpqHe3ThermalCpuFanFailed - 6023 in CPQHLTH.MIB
Symptom: The CPU fan status has been set to Failed. A processor fan is not operating normally. The
server will be shut down.
Supporting SNMP trap data:
 sysName
 cpqHoTrapFlags
Supporting SNMP trap description: “CPU fan has failed. Server will be shutdown.”
6024 - cmahealthd
Log message: “A non-operational processor fan has returned to normal operation.”
SNMP trap: cpqHe3ThermalCpuFanOk - 6024 in CPQHLTH.MIB
Symptom: The CPU fan status has been set to OK. Any previously non-operational processor fans have
returned to normal operation.
Supporting SNMP trap data:
 sysName
 cpqHoTrapFlags
Supporting SNMP trap description: “CPU fan is now OK.”
6025 - cmahealthd
Log message: “An 'ASR Recover Complete' trap signifies that the system has been shutdown by the ASR
feature and has just become operational again.”
SNMP trap: cpqHe3AsrConfirmation - 6025 in CPQHLTH.MIB
Symptom: The server is operational again. The server was previously shut down by the Automatic Server
Recovery (ASR) feature and has become operational again.
Supporting SNMP trap data:
 sysName
 cpqHoTrapFlags
Supporting SNMP trap description: “Server is operational again after ASR shutdown.”
6026 - cmahealthd
Log message: “The server has previously been shutdown due to a thermal anomaly and has just become
operational again.”
SNMP trap: cpqHe3ThermalConfirmation - 6026 in CPQHLTH.MIB
Symptom: The server is operational again. The server was previously shut down because of a thermal
anomaly on the server and has become operational again.
Supporting SNMP trap data:
 sysName
 cpqHoTrapFlags
Supporting SNMP trap description: “Server is operational again after thermal shutdown.”
6027 - cmahealthd
Log message: “Power on Self-Test (POST) errors occurred during the server restart process.”
SNMP trap: cpqHe3PostError - 6027 in CPQHLTH.MIB